-
Samsung Robust case for Galaxy S25 FE, black1 X €32,70
Smoke and carbon monoxide detector MOES ZSS-S02-CS-A-MS
- Regular price
- €36,81
- Sale price
- €36,81
- Regular price
-
- Unit price
- per
Couldn't load pickup availability
Čas dostave
Izdelek bomo predvidoma poslali čez: 5 dni




MOES ZSS-S02-CS-A-MS
The combination detector is intended for households who want to monitor the danger of smoke and carbon monoxide in one room.
- An audible and visual alarm helps to quickly detect a warning.
- The LCD display shows the measured CO concentration.
- Battery power allows installation without connection to the mains.
- Low battery notification helps you monitor the status of your device.
The MOES ZSS-S02-CS-A-MS smoke and carbon monoxide detector combines a photoelectric smoke sensor and an electrochemical CO sensor. When danger is detected, it triggers an audible alarm with a volume of at least 85 dB and a visual warning, and the LCD screen displays the measured carbon monoxide concentration.
The detector covers an area of up to 40 m² in one room. It requires two AA batteries to operate, which provide up to 3 years of use. With support for the Zigbee protocol, you can connect it to a compatible gateway and receive alerts in the MOES, Smart Life or Tuya application.
⚖️ Compare features with other products of your choice

Dual detection for greater security
MOES uses two types of sensors to detect different hazards. A photoelectric sensor responds to smoke at a sensitivity of 0.25 dB/m, and an electrochemical sensor detects carbon monoxide (CO), a colorless, odorless gas that can be dangerous to health and life.
The detector responds to CO concentrations according to certain thresholds: at 50 ppm in 60–90 minutes, at 100 ppm in 10–40 minutes and at 300 ppm in a maximum of 3 minutes. Air inlet openings arranged around the entire perimeter of the housing allow air to be supplied from different directions.

Distinct alarms and clear LCD display
When a danger is detected, a siren with a volume of at least 85 dB at a distance of 3 m and a flashing red LED are triggered. In the case of a smoke alarm, the detector emits four beeps every 5 seconds, and in the case of a dangerous concentration of CO, it beeps every 6 seconds. If it detects both dangers at the same time, it alternates the warnings.
The backlit LCD screen allows you to monitor carbon monoxide levels. When the concentration exceeds 20 ppm, the screen automatically turns on and displays readings that are updated every second. LEDs indicate the device status: green indicates power, yellow indicates an error or malfunction, and red indicates a smoke or CO alarm.

Smart home connection
The detector supports the Zigbee protocol. When connected to a compatible gateway, you can receive notifications about detected hazards in the MOES, Smart Life or Tuya app. You can also use it to create automations, for example, set smoke or CO detection to trigger a selected action in your smart home system.
For remote notifications and other smart features, you need an external Zigbee gateway connected to a 2.4GHz Wi-Fi router. The gateway is not included and must be purchased separately.

Alarm silencing and power supply
The TEST button allows you to silence the alarm for approximately 10 minutes, for example if smoke is accidentally detected while cooking. The function is available for smoke alarms and CO alarms at concentrations of 100-200 ppm. If the CO concentration exceeds 300 ppm, the detector automatically cancels the silence and re-activates the alarm.
Powered by two 1.5V AA batteries, it provides up to 3 years of operation. A low battery warning lets you know when the batteries need to be replaced. The detector has a stated lifespan of 10 years from the date of manufacture.

Installation and recommended place of use
The detector measures approximately 105 mm in diameter and 39 mm in height and weighs 180 ± 10 g. It can be mounted on a ceiling or wall. The base is attached with two screws and wall plugs, and the twist mechanism allows the detector to be attached and removed without tools, for example when changing batteries or cleaning.
The detector is intended for use in a single room with an area of up to 40 m² and operates at temperatures from −10 °C to +50 °C. Do not install it in rooms with a lot of dust or moisture, near exhaust gases or in a place with strong air flow, as these factors may affect performance or cause false alarms.

Kit contents
- MOES smoke and carbon monoxide detector: 1 piece
- User manual: 1 piece
Technical specifications
| Manufacturer | MOES |
|---|---|
| Model | ZSS-S02-CS-A-MS |
| Device type | Type B – audible and visual alarm |
| Smoke sensor type | Photoelectric (reflective) |
| CO sensor type | Electrochemical |
| Smoke detector sensitivity | 0.25 dB/m |
| CO response thresholds | 50 ppm: 60–90 minutes; 100 ppm: 10–40 minutes; 300 ppm: maximum 3 minutes |
| Alarm volume | ≥ 85 dB at a distance of 3 m |
| Screen | Backlit LCD |
| Reading update frequency | Every second |
| Screen On Threshold | Above 20 ppm CO |
| Communication protocol | Zigbee |
| Frequency band | 2.405–2.480 GHz |
| Maximum radio transmission power | < +10 dBm |
| Compatible applications | MOES, Smart Life, Tuya |
| Required transition | Zigbee gateway connected to a 2.4GHz Wi-Fi router (sold separately) |
| Smart features | In-app notifications, smart home automation |
| Power supply | 2 AA batteries, 1.5 V |
| Battery life | Up to 3 years |
| Device lifespan | 10 years from the date of manufacture |
| Low battery warning | Yes |
| Average standby power consumption | < 50 µA |
| Average current consumption during alarm | < 90mA |
| Detection area | Up to 40 m² in one room |
| Air supply | 360°, honeycomb structure |
| Installation location | Ceiling or wall |
| Mounting mechanism | Twist lock (safe rotation) |
| Mounting hole spacing | 75mm |
| Operating temperature | From −10 °C to +50 °C |
| Dimensions | Approximately 105 × 39 mm |
| Mass | 180 ± 10g |
It is important to know
When choosing, it is useful to distinguish between device features and smart connectivity options. Remote notifications in the app require an additional Zigbee gateway, so check if you already have one or plan to use one before purchasing.
- A Zigbee gateway is not included, so connecting to the app is an additional step and expense when setting up a smart home.
Source of editorial recommendations: general verifiable guidelines for product selection.
In practice
🏠 Combined function in one space
🟢 Very convenient – the device combines smoke and carbon monoxide detection, making it practical for users who want these functions in one product.
Answers to frequently asked questions
What applications does the detector support?
You can connect it to MOES, Smart Life or Tuya apps via a compatible Zigbee gateway.
Description updated: November 2026
Why buy from ENAA?
- The descriptions are designed neutrally, with clear summaries of benefits and functionality, and we leave the decision to the customer.
