Screw spacer for plasterboard + magnet (Stanley STHT0-05926)
Are you planning to install drywall and want to achieve professional results without damaging the material? The Drywall Screw Spacer + Magnet (from the renowned manufacturer Stanley, SKU: STHT0-05926) is an indispensable tool for every drywall installer, DIYer or professional builder. This premium PH2 adapter allows for fast, precise and perfectly aligned screwing into drywall without piercing the cardboard or damaging the core of the board.
Thanks to the innovative design with depth stop and powerful magnet, your work will be done much faster, with less effort and without lost screws. Forget about guessing how deep to drive a screw - this bit does the work for you.
Why choose Stanley screw spacer for plasterboard?
When installing drywall and ceiling systems, it is crucial that the screws are driven in just the right depth. If the screw is driven in too shallow, it will interfere with the puttying; if it is driven in too deep, it will pierce the paper surface of the drywall, thereby losing its load-bearing capacity. This is where the Stanley STHT0-05926 comes in.
This professional adapter is equipped with a special steel ring that acts as a spacer and depth stop. Once the screw reaches the optimal depth, the adapter prevents further penetration into the material. The result is a perfectly flat finish, ready for immediate bandaging and puttying.
Key benefits that make your work easier:

Perfect depth every time: The built-in mechanism pushes the screw exactly to the desired depth, preventing damage to the drywall.
Strong magnetic grip: The strong magnetic tip holds the screw firmly on the bit. This allows you to work easily with one hand, as the screws do not fall to the floor during installation.
Universal Compatibility: The bit is designed to fit most standard drills and screwdrivers. It is suitable for any 3/8- or 1/2-inch bit (chuck).
Ergonomic and lightweight design: The ergonomically designed attachment offers excellent grip, reduces hand fatigue during prolonged work on walls or ceilings, and is extremely lightweight to carry.
Durability and long life: It is made of high-quality and resistant materials that can withstand high loads in daily professional use.

Technical features and specifications
This high-quality adapter is optimized for fast and efficient work on the construction site or in home renovation. Below are the main technical specifications of the product:

Manufacturer: Stanley
Product code (SKU): STHT0-05926
Bit type: PH2 (Phillips) drywall adapter
Compatibility: Fits any 3/8-inch or 1/2-inch chuck on drills and screwdrivers
Material protection: Robust steel ring protects the plasterboard from damage
Magnet: Integrated strong magnetic tip for secure holding of screws
Intended use: Fast and precise screwing of plasterboard into wooden or metal substructures (frame)

How to properly use a gypsum board spacer?
Using the Stanley screwdriver bit is extremely simple and requires no prior experience. Follow these simple steps to achieve perfect results:

Insert the screw-in spacer into the chuck of your drill or cordless screwdriver (3/8" or 1/2") and tighten it securely.
Place a PH2 drywall screw on the magnetic tip of the bit. The magnet will keep the screw aligned and stable.
Position the screw at the marked location on the plasterboard and start screwing.
Drill until the steel ring (spacer) comes into contact with the surface of the plasterboard. The bit will automatically prevent deeper screwing and the screw will ideally be countersunk just below the surface of the board.

This simple process will drastically reduce the time required to install ceilings or partitions, while also using significantly less putty material, as all screws will be aligned in the same plane.
Frequently Asked Questions (FAQ)
1. Is this attachment suitable for all types of cordless screwdrivers?
Yes, the Stanley Screwdriver Spacer is designed for universal use. It is suitable for mounting on any standard 3/8" or 1/2" bit or chuck of most drills and screwdrivers on the market.
2. How do the magnet and steel ring help with the work?
A strong magnet holds the screw firmly on the PH2 tip, allowing you to hold the drywall with one hand while easily screwing with the other. The steel ring acts as a physical block (depth limiter) to prevent the screw head from penetrating too deeply and piercing the drywall cardboard.
3. Can I also screw into metal profiles with this attachment?
Of course. The attachment is designed to make it easier to screw plasterboard into the supporting frame, regardless of whether it is a wooden substructure or standard metal (UD/CD) drywall profiles.
Order your Stanley bit today!
Don't let poorly tightened screws take up valuable time and energy when caulking and fixing mistakes. With the Stanley STHT0-05926 Screw Spacer, you'll get the job done faster, more accurately, and with minimal effort. Get your professional tool and take your projects to the next level!


Responsible persons:
STANLEY - AW-Narzędzia Walenty Androsiuk sp.k., Magazynowa 4, 15-399 Białystok, biuro@aw-narzedzia.com.pl, +48607154410
Distributor for Slovenia: Haloorodje.si, Online Sales, Rok Groznik sp, Podturn 42, 8350 Dolenjske Toplice, info@haloorodje.si, +38669731944, Slovenia
Product origin: China

Instructions for using the product:
• Check that the screw-in spacer is suitable for your drill or screwdriver. Check that the bit is compatible with your tool in terms of size and fastening mechanism.
• Before use, check that the attachment is fully assembled and undamaged. Check that the magnet is in good condition and strong enough.
• Prepare the gypsum boards and screws for installation. Place the gypsum boards in the desired location and mark the places where you will insert the screws.
• Insert the screw-in spacer into the drill or screwdriver. Make sure the bit is properly attached and securely seated.
• Place the screw on the tip of the bit and secure it to the plasterboard. The magnet will hold the screw in place while you tighten it.
• Continue screwing all the screws into the plasterboard. Be careful not to overtighten to avoid damaging the board.
• When you have finished the installation, check that all screws are properly tightened and that the plasterboard is firmly attached.

Useful tips for work:
• When installing gypsum boards, use the correct length of screws. Screws that are too short will not provide a secure hold, while screws that are too long may damage the boards.
• It is recommended to mark the places where you will insert the screws before assembly. This will make the assembly process easier and faster.
• During installation, be careful not to press too hard on the gypsum boards, as they may be damaged. Use even pressure and gentle movements.
• After completing the assembly, check that all screws are properly tightened. If you notice any loose screws, tighten them further.
• Clean the screw-on spacer after use and store it in a safe place. This will extend the life of the spacer and ensure it is ready for the next use.

Warnings:
• Use the attachment only with compatible power tools and accessories.
• Always turn off and unplug the drill or screwdriver before changing the attachment or bit.
• The attachment is not intended for impact use; the manufacturer does not label it as Impact Rated.
• Do not use a damaged, bent or badly worn attachment.
• Wear safety glasses when working, as flying particles may be generated when screwing.
• Keep the rotating part of the attachment away from fingers, hair or loose clothing.
• Keep out of reach of children.

Same summary

The magnetic screw spacer is designed for users who frequently screw into drywall and need easy control of the screwing depth. It is best suited for drywall work where precision is required, as it helps prevent material damage and allows for the equal tightening of a larger number of screws. Due to its specialized design with a magnetic holder, it is less suitable for universal screwing tasks or materials that require other types of attachments. The magnet improves the user experience especially when working overhead and in difficult-to-reach areas.

Recommendation source: Enaa guides and team experience.

User view

The users of this attachment are mostly home craftsmen who regularly assemble or install plasterboard, as well as those who deal with occasional renovations in the apartment or garage. The practicality of the magnetic attachment comes to the fore in situations where it is important that the screw remains in place even with one hand, for example on ceilings or in tight corners. Due to its simplified use and reduced risk of damage to the panels, the attachment is suitable for anyone who wants greater precision and less trouble when tightening screws when working on drywall.

Stanley brand products are known for their long-term reliability and robustness, which is why they often remain the first choice even for more demanding users when working with power tools.

Why buy at Enaa

At Enaa, you can easily browse a wide range of attachments and compare features, allowing you to better tailor them to your needs. We provide detailed information about the products and clearly highlight their suitability for specific tasks, making it easier for you to choose the right tool.

Answers to frequently asked questions

What materials is this attachment best suited for?

The bit is specifically designed for screwdriving into plasterboard where precise depth control is important. For other materials such as wood or metal, other dedicated bits can be used.

Is the attachment suitable for use with various electric screwdrivers?

Yes, the bit is designed to be used with most standard electric screwdrivers that allow the use of magnetic bit holders.

How does the magnetic function make work easier?

The magnet holds the screw on the attachment, making it easy to handle, especially when working overhead or in tight spaces where it is not possible to use both hands.

Is the screw-in depth setting fixed or adjustable?

This type of spacer typically allows for a fixed screwing depth, tailored for users who want to screw evenly into plasterboard without the risk of sinking the screw too deep into the material.

Can the attachment also be used to remove screws?

The attachment is primarily intended for screwing, not removal. Other, specialized attachments and accessories are more suitable for removing screws.

Description updated: April 2026