Replacement airless sprayer hose 7.5m Airless (SKU: 2002 / DED7422 / DED7437-07)
Are you looking for a reliable, high-pressure and extremely durable hose for your airless painting system? The 7.5 meter long Airless Sprayer Replacement Hose is a premium replacement part that ensures smooth operation, maximum safety and professional results on every painting project. Whether you are a professional painter, construction contractor or passionate DIYer, this high-quality high-pressure hose allows for optimal paint flow under high pressure without loss of efficiency.
Compatible with a variety of airless sprayer models (including established brands and SKUs: 2002, DED7422 and DED7437-07), this hose is a key piece of your painting equipment. The 7.5-meter length gives you exceptional mobility, greater reach and freedom of movement without constantly moving the heavy unit itself, significantly speeding up your work and reducing physical effort.

Why choose a 7.5 m Airless replacement hose?
When working with airless sprayers (Airless technology), the hose is exposed to extreme pressure, constant bending, dragging over rough surfaces and the impact of aggressive chemicals. Standard or low-quality hoses quickly wear out, crack or start to kink, which can lead to dangerous injuries, loss of pressure or long-term interruption of work. Our replacement hose is designed with maximum safety, long life and superior flexibility in mind.
Replacing a worn or damaged hose is essential for maintaining consistent pressure while painting. Fluctuations in pressure can cause uneven paint application, drips, or unwanted streaks on the surface. With the new 7.5-meter Airless hose, you will regain full control over your application and achieve flawlessly smooth surfaces every time you spray.

Key product benefits and features

Exceptional working pressure: The hose safely withstands a maximum working pressure of up to 227 Bar (3300 PSI), allowing safe use even with denser materials, varnishes, enamels and dispersion paints.
Optimal length for greater mobility: The 7.5 meter length offers the perfect balance between sufficient reach (even when painting ceilings and high walls) and easy maneuverability on the job site without excess weight.
Standard 1/4" connection: Universal thread ensures quick, tight and easy installation on most commercially available Airless guns and sprayers on the market.
Durable multi-layer construction: High-quality materials prevent folding, twisting, and damage from rubbing against the floor, sharp edges, or scaffolding.
Chemical resistance: The inner core of the pipe is resistant to solvents, chemicals and water, which prevents material breakdown and extends the life of the pipe.
Easy storage: Despite its robustness and resistance to high pressure, the hose remains extremely flexible, allowing for easy rolling, cleaning and storage after work is finished.


Technical specifications and features
This replacement hose is manufactured to the highest industry standards for airless paint and varnish application. Detailed product specifications are listed below:

Product type: Replacement hose for airless sprayer (Airless)
Pipe length: 7.5 m
Maximum pressure: 227 Bar (3300 PSI)
Connection size: 1/4 inch (standard Airless thread)
Color: Random (depending on the current production batch)
Compatible Tags / SKU: 2002, DED7422, DED7437-07
Category: Spare parts and brushes


Increase your painting productivity
Thanks to its robust construction, the hose is resistant to chemicals found in solvents and paints, preventing the inner walls of the hose from swelling or cracking. The flexibility of the material allows it to be easily rolled up and stored after work, saving you time in preparing and cleaning the work area. Investing in a quality replacement hose means less downtime, increased safety and long-term savings on the maintenance of your painting equipment.

Demonstration video of operation
See how professional airless paint sprayers work and why a quality high-pressure hose is crucial for achieving the best results, even application and safety at work:


Frequently Asked Questions (FAQ)
1. Is this hose compatible with my paint sprayer?
The hose is equipped with a standard 1/4" connection and is compatible with many airless sprayers on the market, especially those that match the SKUs: 2002, DED7422 or DED7437-07. We recommend that you check the thread size and specifications on your device before purchasing.
2. What pressure can this Airless hose withstand?
The hose is designed to work under extremely high pressure and can safely withstand a maximum pressure of 227 Bar (equivalent to approximately 3300 PSI). This is more than enough for most professional, semi-professional and more demanding home painting jobs.
3. What color is the pipe?
The color of the hose is random and depends on the current batch supplied by the manufacturer. The color does not affect the technical characteristics, quality, working pressure or overall functionality of the hose.


Responsible persons:
DEDRA - Dedra-Exim Sp. z o. o. ul. 3 May St. 8, 05-800 Pruszków, Poland, sklep@dedra.pl (+48)22 738 39 89
Distributor for Slovenia: Haloorodje.si, Online Sales, Rok Groznik sp, Podturn 42, 8350 Dolenjske Toplice, info@haloorodje.si, +38669731944, Slovenia
Product origin: China

GEKO - GEKO SPÓŁKA Z OGRANICZNĄ ODPOWIEDZIALNOŚCIA SPÓŁKA KOMANDYTOWA, ul. Spacerowa 3, 97-500 Kietlin, Poland, (+48) 446824004, geko@geko.pl
Distributor for Slovenia: Haloorodje.si, Online Sales, Rok Groznik sp, Podturn 42, 8350 Dolenjske Toplice, info@haloorodje.si, +38669731944, Slovenia
Product origin: China

Instructions for using the product:
• Before installation, check that the hose is 7.5 m, the connection is 1/4" and that it fits your airless sprayer. The maximum pressure listed for this product is 227 bar.
• Turn off the airless tool, relieve pressure and disconnect power before removing the old hose.
• Remove the old hose and check the connections on the device and gun.
• Connect the new hose to the sprayer and gun. Thread the thread by hand and then tighten it properly, but without excessive force.
• Before use, check that all connections are properly installed and that the hose is not kinked or damaged.
• Start the device according to its instructions and first check the system at low or safe pressure.
• During work, the pipe should be laid so that it does not bend, rub against sharp edges, or get underfoot.
• After finishing work, first relieve the pressure in the system, then turn off the device and only then disconnect the hose.
• Clean the pipe according to the instructions of the manufacturer of the paint or coating used.
• Before storing, roll it into large, loose loops and protect it from mechanical damage.

Useful tips for work:
• The 7.5 m length allows greater flexibility when painting larger rooms and surfaces.
• The pipe should be as free and straight as possible during work, as severe bending reduces flow and can damage the pipe.
• Do not pull the airless sprayer by the hose. Move the sprayer separately if necessary.
• Before each work, check the hose along its entire length, especially the connection area.
• If you notice blistering, cracks, damaged sheathing or leaks, stop using the hose immediately.
• Clean the hose as soon as possible after using the paint. Dried paint can cause blockages.
• For cleaning, only use a cleaner that is compatible with the paint or coating used.
• Do not use sharp wire or other objects to mechanically pierce a clogged pipe, as you may damage its interior.
• Before use, check your sprayer manufacturer's recommendations regarding maximum allowable pressure and hose compatibility.

Warnings:
• The airless hose operates under very high pressure. The maximum pressure listed for this model is 227 bar.
• Never repair a damaged pipe with duct tape, clamps or other improvised solutions.
• Do not check for leaks with your hand. The high-pressure jet can cause serious damage to skin and tissue.
• Always completely relieve system pressure before disconnecting hoses.
• Never point the gun at yourself or other people.
• Do not exceed the maximum allowable pressure of the pipe or any part of the system.
• Protect the hose from sharp edges, hot surfaces, chemicals, vehicles and mechanical damage.
• Do not use the hose if its outer sheath or connector is damaged.
• Do not bend the pipe at a sharp angle or drive over it with a vehicle.
• Only use coatings and cleaners that are compatible with the hose and your airless system.
• When working, wear safety glasses, gloves and appropriate respiratory protection when required by the coatings used.
• When working with flammable coatings, follow the coating manufacturer's instructions regarding ventilation and ignition sources.
• Store the pipe so that it is not exposed to sun, frost and unnecessary mechanical stress.
• Keep out of reach of children.

Same summary

The 7.5m Airless Sprayer Replacement Hose is primarily intended for users who want to renew or extend the life of their sprayer without having to replace the entire tool. It is suitable for both DIYers and more frequent hobby or service users, provided that it fits the exact sprayer model. Before making a choice, it is wise to check compatibility with the specific brand or model of the tool, as only the correct choice ensures optimal performance without leaks and unnecessary maintenance. This replacement part does not solve the problem if the sprayer is not in good condition or if the hose is not the right length and connection for your device.

Recommendation source: Enaa guides and team experiences.

User view

This hose is most often used by users who already use an airless sprayer and want to quickly restore some of the flow in case of wear or damage. It is especially useful for regular maintenance of the tool to ensure that the sprayer runs smoothly, but also in cases where we want to adapt the hose to the needs of reach or working on larger surfaces.

Dedra brand products are usually chosen by those users who value reliability and easy access to spare parts for their tools, as Dedra has been offering good support and a wide range of accessories for many years.

Why buy at Enaa

We offer a wide selection of spare parts and accessories for your tools, with detailed descriptions for easy comparison and quick search for the right spare part. We recommend systematically checking compatibility information, which allows for a more worry-free experience when maintaining your tools.

Answers to frequently asked questions

Is this hose suitable for all models of airless sprayers?

No, you should choose a hose based on compatibility with your sprayer model. Please check the technical data before purchasing or ask the manufacturer for accurate information.

What should I do if I am not sure about the suitability of the hose for my tool?

It is recommended to check the connection data, length and requirements of your sprayer or consult experienced service technicians.

How often is it recommended to change the hose on an airless sprayer?

It makes sense to replace it if there are signs of wear, damage or reduced flow, and intensive users should inspect the hose at least once a year.

Is installing a new pipe difficult?

Installation is usually not difficult if you choose the appropriate hose for your sprayer, as the connection is standardized for most models. We recommend taking care to check for leaks after replacement.

Description updated: April 2026