Skip to content

Search
Skip to product information
1 of 6

Rain sensor MOES ZSS-RL01-A-MS

Regular price
€16,99
Sale price
€16,99
Regular price
Rain sensor MOES ZSS-RL01-A-MS Requires a compatible Zigbee gateway for rain and water detection A smart sensor for users who want to monitor exposed areas...
Vendor: Moes
Availability: In stock , 5 dni Out of stock

Čas dostave

Svg Vector Icons : http://www.onlinewebfonts.com/icon

Izdelek bomo predvidoma poslali čez: 5 dni

Rain sensor MOES ZSS-RL01-A-MSRain sensor MOES ZSS-RL01-A-MSRain sensor MOES ZSS-RL01-A-MSRain sensor MOES ZSS-RL01-A-MSRain sensor MOES ZSS-RL01-A-MS

Rain sensor MOES ZSS-RL01-A-MS

Requires a compatible Zigbee gateway for rain and water detection

A smart sensor for users who want to monitor exposed areas and connect water detection to home automation.

  • You can receive a notification in the app when it is detected.
  • With compatible devices, it can trigger automatic window closing.
  • Adjustable sensitivity allows you to customize rain detection.
  • Light measurement allows for inclusion in smart lighting scenarios.


The MOES ZSS-RL01-A-MS rain sensor detects rain and the presence of water and transmits the data via Zigbee to a compatible gateway. You can monitor the detections, receive notifications and connect the sensor to other devices in your smart home automation in the MOES, Smart Life or Tuya apps. Requires a separately purchased Zigbee gateway to operate.

The sensor also allows you to measure light intensity from 0 to 4000 lx, and the rain detection sensitivity can be adjusted in the range from 0 to 9. It is powered by a CR123A battery, and IPX4 protection means that the housing is protected against splashing water.

Rain sensor mounted on an outside window sill and on a concrete wall with adhesive tape.

Key product features

Property Value Rating
Type Flood sensor/detector
Needs a central office Yes
Network connection method Via bridge (Zigbee)
Zigbee Yes
Wi-Fi No
Tuya / Smart Life Yes
Bluetooth (BLE) No
Matter No
Z-Wave No
Thread No
Power supply CR123A battery


⚖️ Compare features with other products of your choice

Automatic window closing in the rain

If the sensor is connected to a compatible Zigbee window actuator and a Zigbee gateway, it can be included in the automation of closing windows. When it detects rain, it can trigger the connected actuator to close the window. This way, you can reduce the possibility of rain getting into the room through an open window, even when you are not at home. For this to work, you need compatible devices and a properly set scenario in the app.

A smart rain sensor on the windowsill that works with a mechanism to automatically close the window during rain.

Water detection and notifications

You can use the sensor to monitor places where you want to detect the presence of water, for example near a pipe, bathtub or aquarium. When detected, you can receive a notification via the app or trigger a connected device or automation. This way, you can be alerted to a potential leak or spill even when you are not in the room. The operation of notifications and automations depends on the connection to the gateway, the app and the smart home settings.

Four uses of the sensor: detecting rain outside the window, leaks under the sink, bathtub overflows, and aquarium leaks.

Adjustable detection sensitivity

The rain detection sensitivity can be adjusted in the app on a scale of 0 to 9 depending on the installation location and desired response. After changing the setting, press the SET button on the housing once to apply the new value. Please note that the actual response of the sensor also depends on its installation and exposure to water.

A wet rain sensor on a windowsill and a smartphone with an open app to adjust the sensor's sensitivity.

Light intensity measurement for automation

In addition to detecting water, the sensor also measures light intensity in the range of 0 to 4000 lx. You can use this information in smart lighting automation, for example to turn on compatible lights when it gets dark outside. To implement such a scenario, you need a compatible gateway, lights, and properly configured automation.

A compact rain sensor in a white housing, mounted on a marble window sill in the sunroom.

Monitoring events in the application

The sensor is compatible with MOES, Smart Life and Tuya apps. In the app, you can track detections and their history, receive notifications and check the displayed battery percentage. This makes it easier to track when the sensor has detected a change and notice in time that the battery may need to be replaced.

Notification of a detected water leak on the screen of a smartphone synchronized with a bathroom flood sensor.

Battery powered

It uses one 3V CR123A battery for operation. According to the product data, the battery can provide up to 2 years of operation; actual time depends on use and operating conditions. Low standby power consumption, listed as 10 µA, contributes to efficient battery use. Since the sensor does not require a power cord, it can be installed in a location without a nearby electrical outlet. The battery is not listed in the list of included contents.

A cross-section of a rain sensor showing the electronic circuitry and compartment powered by a replaceable battery.

Installation and protection against water

The sensor has an IPX4 protection level, which means it is protected against splashing water. It operates in temperatures from −10 °C to +60 °C. Install it in a place where it can detect rain, but observe the protection level and the instructions for use. For proper operation, the drainage holes at the bottom of the base must be free; clean and maintain the sensor regularly.

The base can be attached to the window sill with double-sided tape, or with a screw if necessary. If the window does not have a sill, the sensor can be mounted on the outer surface of the glass, but it must not obstruct the opening of the window. Before installation, check that the selected location allows for adequate exposure to rain.

The stated dimensions of the housing are 54 mm wide and 28 mm deep; the height is 25 mm at the front and 37 mm at the back. The total height of the sensor with mounting base is 40 mm.

Waterproof rain sensor installed on the outside wall of the balcony during a downpour.

Zigbee connection and getting started

To connect to the app and your smart home, you need a Zigbee gateway, sold separately. The sensor communicates via Zigbee, while the gateway can connect to your home's 2.4GHz Wi-Fi network. The sensor itself does not have Wi-Fi connectivity.

To start pairing, open the battery cover, insert a CR123A battery, and press and hold the setup or reset button for approximately 3 seconds. When the red LED starts flashing, the sensor is in pairing mode. The Zigbee frequency band is 2.405-2.480 GHz, and the maximum radio transmission power is listed as < +10 dBm.

A diagram of a smart home system connecting an outdoor rain sensor, window actuator, and network gateway.

Package contents

  • MOES rain sensor × 1
  • User manual × 1

Technical specifications

Manufacturer MOES
Model ZSS-RL01-A-MS
EAN 6978507850920
Connectivity Zigbee
Compatible applications MOES, Smart Life, Tuya
Supply voltage DC 3V
Battery type CR123A (3V)
Estimated battery life Up to 2 years
Standby current 10 µA
Setting the rain detection sensitivity 0–9
Light intensity measurement range 0–4000 lx
Operating temperature −10°C to +60°C
Protection level IPX4
Frequency band 2.405–2.480 GHz
Maximum radio transmission power < +10 dBm
Necessary transition Zigbee; sold separately
Wi-Fi network frequency for the gateway 2.4GHz
Housing dimensions 54 × 28 mm; height front 25 mm, rear 37 mm
Height with mounting base 40mm
Functions Rain and water detection, light intensity measurement, notifications and event history in the app, battery status monitoring, smart home automation

Diagram of wireless communication between a rain sensor, a ZigBee gateway, a Wi-Fi router, and a smartphone app.




It is important to know

When choosing, it is crucial that you already have or plan to have a compatible Zigbee gateway: the sensor does not connect directly to your home Wi-Fi. So before purchasing, check that it is compatible with your existing system and app.

  • It makes the most sense when you want to incorporate rain detection into a specific scenario, such as a notification or response from another connected device.
  • To automatically close a window, a sensor alone is not enough: you also need a compatible window actuator and appropriately configured automation.
  • Light metering is an additional option for automations, but it is only useful if you have a device connected to it and a specific operating scenario.

Source of editorial recommendations: ENAA guides and team experience.

In practice

🌧️ Notification or response when rain is detected

🟢 Very convenient – detects rain and can be integrated into notifications or automation with another device via a compatible gateway.

🪟 Automatically close the connected window

🟡 Suitable with restrictions - the scenario is possible with a compatible window actuator, Zigbee gateway and set automation; the sensor does not close the window itself.

💡 Automation based on light

🟡 Suitable with limitations - you can use light measurement as a trigger, but it requires a connected system to perform the desired response.

Answers to frequently asked questions

Does the sensor connect directly to your home Wi-Fi?

No. To connect to the app and smart home, a Zigbee gateway is required, which is sold separately.

Can it automatically close the window when it detects rain?

Not standalone. Such a scenario requires a compatible window actuator, Zigbee gateway, and properly configured automation.

Can it also be used to detect water, not just rain?

Yes. The product is also described to detect the presence of water, for example near a pipe, bathtub or aquarium; notifications and automations depend on the connection and system settings.

Description updated: November 2026

Read also

If you are still deciding, the following content may also be helpful.

Best products

Best Smart Sensors and Detectors 2026

Products for various purposes

Smart sensors and detectors for home automation

Why buy from ENAA?

  • The descriptions are designed neutrally, with clear summaries of benefits and functionality, and we leave the decision to the customer.