Set of 100W self-priming electric pumps, 12V for liquids and fuel (GEKO G00949)
Are you looking for a simple, clean and extremely efficient way to change engine oil or pump fuel? The 100W self-priming electric pump set 12V for liquids and fuel (product code: G00949, from the renowned GEKO brand) is the perfect solution for every home handyman, owner of agricultural machinery or professional mechanic. Forget about the tiring crawling under the vehicle, unscrewing burnt drain plugs and the risk of spilling hazardous waste oil on the floor of your workshop.
This high-quality 12V electric pump allows for quick, safe and completely clean suction of fluids directly through the oil dipstick hole or from the tank. Due to its compact design, high power of 100W and easy connection directly to the vehicle battery, this device is an indispensable tool for regular maintenance of motor vehicles and equipment anywhere and anytime.
Why choose the GEKO G00949 self-priming pump?
Traditional oil changes require the use of a channel, a jack or a special pit, and there is always the risk of getting your hands and work surface dirty. Using this 12V electric pump, the whole process becomes extremely easy and clean. Simply connect the pump to your vehicle's battery with the supplied connectors (pliers), insert the suction hose and turn on the device. The self-priming function ensures that the pump draws the fluid itself, saving you time and effort.
Thanks to the powerful 100W motor and optimal flow rate of between 2 and 4 liters per minute, you will drain the entire amount of oil or fuel in just a few minutes. The device is ideal for servicing passenger cars, motorcycles, quads, motorboats, lawnmowers, tractors and other agricultural and construction machinery powered by internal combustion engines.
Key features and technical specifications
This kit has been designed with durability, safety and maximum usability in the field or in the home garage in mind. Below are all the technical data that ensures top performance:

Power supply: 12 V direct current (DC) - easy connection to the car battery.
Motor power: Powerful 100W motor ensures stable and continuous operation.
Low current consumption: Only 2.5 A, which prevents overheating of the cables and rapid battery discharge.
Pumping capacity: Effective flow rate 2–4 l/min (depending on viscosity and temperature of the liquid).
Exceptional suction depth: The maximum suction depth is up to 1 m, which is sufficient for most engine blocks and tanks.
Discharge height: The maximum discharge height (discharge height) is up to 3 m.
Safety class: Protection class I for safe use.
Convenient switch: Built-in ON/OFF switch on the pump housing for instant control of operation.
Mobility: Power supply via integrated wires with strong battery terminals (clamps).

The main advantages of using the GEKO G00949 kit

Speed and convenience: Quick oil changes and fuel transfers without visiting a mechanic's shop or using car channels.
Clean working environment: No dripping, spilling or dirty floors – the fluid travels directly from the engine to the collection container.
Universal use: Suitable for a wide range of vehicles - from passenger cars and motorcycles to agricultural machinery and boats.
Complete kit for immediate use: Contains all necessary connectors and cables, so you don't need any additional tools to get started.
Compact and portable design: Due to its small dimensions, it can be easily stored in the trunk of a vehicle or on a shelf in a workshop.

Contents of the sales kit
Upon purchase, you receive a complete set that allows you to start working immediately without the need to purchase additional attachments:

1x Self-priming pump for pumping oil and liquids GEKO G00949
1x Power cables with robust battery connectors (clamps)
2x Hose connectors
2x Quick connectors for easy installation
1x Cable tie

Instructions for safe and effective use
For best results and a long pump life, we recommend that you slightly warm the engine oil before pumping (ideal oil temperature is between 40°C and 50°C). Warm oil has a lower viscosity, which allows the pump to suck in its full capacity more easily and quickly. Do not use the pump to pump flammable liquids such as gasoline or to pump water, as this may damage the internal mechanisms of the device.
Frequently Asked Questions (FAQ)
1. Can I pump gasoline or water with this pump?
No. This pump is strictly designed for pumping motor oil, diesel fuel (oil) and other similar non-aggressive viscous liquids. Pumping petrol is extremely dangerous due to the risk of explosion and fire, while pumping water can cause corrosion of internal parts and damage to the pump, as the device requires lubrication from the pumped oils or fuels to function.
2. How do I connect the pump to a power source?
The pump is powered by 12V DC. Simply connect the supplied cables with clamps directly to your vehicle's battery (red clamp to positive pole +, black clamp to negative pole -). Before connecting, make sure the switch on the pump is in the OFF position.
3. How fast can this pump drain engine oil from a car?
The pump capacity is between 2 and 4 liters per minute. The speed depends mainly on the temperature and density of the oil. If the engine oil is preheated to operating temperature (approx. 40-50°C), the pump will empty an average passenger car engine (4 to 5 liters capacity) in less than two minutes.


Responsible persons:
GEKO - GEKO SPÓŁKA Z OGRANICZNĄ ODPOWIEDZIALNOŚCIA SPÓŁKA KOMANDYTOWA, ul. Spacerowa 3, 97-500 Kietlin, Poland, (+48) 446824004, geko@geko.pl
Distributor for Slovenia: Haloorodje.si, Online Sales, Rok Groznik sp, Podturn 42, 8350 Dolenjske Toplice, info@haloorodje.si, +38669731944, Slovenia
Product origin: China

Instructions for using the product:
• Preparing the hoses and connections: Firmly install the supplied hoses of the appropriate diameter on the pump inlet (suction) and outlet connections and secure them with clamps to prevent air suction or leakage during transfer.
• Installing the suction hose into the liquid: Insert the end of the suction hose into a container, barrel or fuel tank, making sure that the suction strainer is clean and completely submerged in the liquid.
• Connection to a 12V power source: Connect the pump to a stable 12V power source (e.g. directly to the terminals of a car, tractor or boat battery with appropriate clamps), ensuring correct polarity (red clamp to +, black to -).
• Start-up and self-priming process: Turn on the pump switch. The self-priming mechanism will draw the liquid from the container in a short time and establish a constant, balanced flow through the pipe system.
• Shutdown after work: As soon as pumping is complete and the container is empty, switch off the pump to prevent prolonged dry running and disconnect the battery power supply.

Useful tips for work:
• Efficient 100W motor for everyday needs: The reliable 12V electric motor provides optimal flow for fast transfer of diesel fuel and heating oil without manual pumping.
• Convenient complete set with included hoses: The set contains all the key elements for immediate use, making it easier to work in the field, in the workshop, on the farm or while sailing.
• Simple self-priming function: The pump quickly starts itself and draws liquid from lower tanks, greatly simplifying the transfer process.
• Mobile use on 12V power supply: The option of connecting to standard batteries allows the pump to be used anywhere - next to working machines, cars, tractors or boats.
• Compact and portable design: Lightweight body and flexible tubes allow for easy storage in the trunk or toolbox.

Warnings:
The pump is designed exclusively for pumping diesel fuel, heating oil and light industrial liquids. Never use it to pump gasoline or other highly flammable volatile liquids, as there is an extreme risk of explosion and fire!
• Avoid dry running: Do not let the pump run "dry" for more than a few seconds. If there is no liquid in the pipes, switch it off immediately to avoid damaging the internal seals and impeller.
• Safe working environment and ventilation: Work only outdoors or in extremely well-ventilated areas and make sure there are no open flames, cigarettes or sources of sparks nearby.
• Correct polarity when connecting: Always ensure that the clamps are correctly connected to the plus and minus poles of the 12V power supply to prevent short circuits or damage to the electric motor.
• Regular cleaning after use: After pumping fuel, ensure that the pipes are clean and prevent impurities from accumulating in the pump system.
• Keep out of reach of small children: Keep the pump and connecting cables in a dry place out of reach of children.