Diamond cutting disc 200mm – Professional quality for precise cutting
Looking for a reliable, extremely sharp and durable tool for processing the most demanding construction materials? The 200mm Diamond Cutting Disc (SKU: 10243) is the ultimate choice for professionals and demanding DIYers. This high-performance diamond disc is designed to deliver clean, fast and precise cuts without chipping the material, saving you time, energy and money on any construction or renovation project.
Thanks to advanced manufacturing technology and a laser-welded diamond segment, this cutting disc offers an exceptionally long service life and consistent cutting power. Whether you're laying paving stones around the house, cutting bricks for a new wall or adjusting delicate ceramic tiles in the bathroom, this disc will take on any challenge. Invest in a tool that delivers professional results without compromise.
The main advantages of using a 200mm diamond cutting disc
When working with construction materials, two things are crucial: safety and efficiency. This 200 mm diameter diamond blade combines both and offers a number of advantages over standard blades:

Exceptional material utilization: With a thickness of only 1.6 mm, it enables an extremely thin and precise cut, which means less waste material, less dust during work and significantly faster cutting.
Superior cooling and safety: The special core design allows for optimal cooling during dry cutting, which prevents the blade from overheating, steel deformation and extends its service life.
Versatile Compatibility: Suitable for dry angle grinders that support a 25.4mm diameter mounting hole, making it an extremely versatile tool in your workshop or on the job site.
Unparalleled safety: Laser-welded segments ensure that the blade can withstand extreme loads without the risk of damage or parts of the blade falling off.

Key features and technical data
To achieve the best results in your work, you need a tool that is technically sophisticated. Below are the key technical features that set this board ahead of the competition:

Professional laser welding: Laser-welded diamond segments ensure maximum safety at work and exceptional wear resistance, even under the highest loads.
Extremely thin profile: With a plate thickness of just 1.6 mm, you achieve superior precision, clean edges and minimal friction when cutting.
Universal use: Developed and optimized specifically for dry cutting of a wide range of hard building materials.
Standard dimensions: 200 mm plate diameter with 25.4 mm mounting hole fits most standard angle grinders on the market.
Long service life: The extremely high concentration of diamond particles in the segment ensures long-lasting sharpness without the need for frequent blade replacement.

Versatile use on various building materials
Forget about constantly and time-consuming changing of different blades while working. This 200mm diamond cutting disc is designed as a multi-purpose tool that cuts the following materials with ease and without effort:

Concrete and aerated concrete: Fast and smooth penetration through hard concrete structures without jamming or overheating your machine's motor.
Brick and clinker: Clean cuts without chipping edges, which is extremely important for aesthetic and finishing construction work.
Pavers: Easy, fast and precise adjustment and cutting of pavers for landscaping yards, garden paths and parking lots.
Ceramic tiles: Precise and gentle cutting of delicate ceramics for a perfect aesthetic appearance without damaging the glaze.

Advantages of laser welding technology
Laser segment welding is considered the gold standard in the professional diamond tool industry. Unlike conventional brazing, laser welding creates an extremely strong, virtually indestructible bond between the diamond segment and the steel core of the disc. This means that the risk of segments falling off during high-speed rotation is completely eliminated. The result is a significantly safer working environment for the operator and operational reliability that you can rely on every day, no matter how demanding the project.
Technical product specifications:

Category: Diamond blades
SKU: 10243
Price: 29.99 EUR
Dial diameter (plate): 200 mm
Mounting hole diameter: 25.4 mm
Dial thickness (plate): 1.6 mm
Cutting method: Dry cutting
Compatibility: Angle grinders

Invest in quality that pays off quickly. With the 200mm diamond cutting disc, you will complete your projects faster, safer and with significantly better and cleaner results. Order yours today at the exceptional price of 29.99 EUR and see for yourself its professional cutting power!

Frequently Asked Questions (FAQ) about the product
1. Which devices is this diamond disc suitable for?
The 200 mm diameter diamond cutting disc is designed to work with dry angle grinders that support a mounting hole with a diameter of 25.4 mm. Before purchasing, we recommend that you check the technical specifications and mounting dimensions on your machine.
2. Can this board be used for wet cutting?
This specific model (SKU: 10243) is optimized and designed primarily for dry cutting using appropriate angle grinders. Its advanced design and slots allow for extremely efficient self-cooling with air during dry work.
3. What materials can I cut most effectively with this disc?
The blade is extremely versatile and ideal for processing a wide range of construction materials. It performs well when cutting concrete, aerated concrete, classic brick, clinker, paving stones and even more delicate ceramic tiles, where it prevents unwanted chipping of the edges.


Responsible persons:
SILVER TOOLS - ELMAX SP. K., ul.GIEŁDOWA 7, 15-694 Fasty Białystok, Poland, +48 733 596 666 zakupy@silvertools.com.pl
Distributor for Slovenia: Haloorodje.si, Online Sales, Rok Groznik sp, Podturn 42, 8350 Dolenjske Toplice, info@haloorodje.si, +38669731944, Slovenia
Product origin: China

Instructions for using the product:
• Check the 200 mm diameter diamond cutting disc before installation. Do not use the disc if it is cracked, bent, badly worn or damaged.
• Check that the disc diameter and bore are compatible with your cutting device.
• Disconnect the tool from the power supply or remove the battery before installation.
• Install the disc in the correct direction of rotation as indicated by the arrow on the disc.
• Correctly install and tighten the fastening nut or flange according to the tool manufacturer's instructions.
• Before starting, check that the disc can rotate freely and does not touch the protective cover anywhere.
• Secure the workpiece and start the tool at a safe speed.
• Guide the plate evenly and without excessive lateral pressure.
• After finishing the cut, switch off the tool and wait until the disc has come to a complete stop before putting it down or removing it.

Useful tips for work:
• Check the 200 mm diameter diamond cutting disc before installation. Do not use the disc if it is cracked, bent, badly worn or damaged.
• Check that the disc diameter and bore are compatible with your cutting device.
• Disconnect the tool from the power supply or remove the battery before installation.
• Install the disc in the correct direction of rotation as indicated by the arrow on the disc.
• Correctly install and tighten the fastening nut or flange according to the tool manufacturer's instructions.
• Before starting, check that the disc can rotate freely and does not touch the protective cover anywhere.
• Secure the workpiece and start the tool at a safe speed.
• Guide the plate evenly and without excessive lateral pressure.
• After finishing the cut, switch off the tool and wait until the disc has come to a complete stop before putting it down or removing it.

Warnings:
⚠️ The diamond cutting disc rotates at high speed during operation and can cause serious injuries.⚠️ Always unplug the power tool from the power source or remove the battery before installing or removing the disc.⚠️ Never exceed the maximum permitted speed of the disc.⚠️ Do not use a cracked, deformed or damaged disc.⚠️ Always use the appropriate protective cover on the cutting tool.⚠️ Wear safety glasses, hearing protection and appropriate respiratory protection against mineral dust when working.⚠️ Do not use the disc for materials for which it is not intended.⚠️ Do not perform side grinding with the cutting disc unless the specific disc is expressly intended for this purpose.⚠️ Hazardous dust can be generated when cutting mineral materials dry - ensure effective extraction or appropriate respiratory protection.⚠️ After switching off, do not touch the disc until it has come to a complete stop.

Same summary

The 200 mm diamond cutting disc is designed for users who are looking for precision and adequate performance for a variety of domestic and professional cutting tasks. It is especially suitable for those who want neat work on materials such as stone, ceramics or concrete, and occasionally for less demanding cuts in wood or plastic, if the disc allows it. It is important that the diameter of the disc matches your tool and that you choose the type of disc according to the material you want to cut. For longer or very demanding tasks, it is useful to consider a higher quality disc, as the service life and safety depend significantly on the appropriateness of the choice and frequency of use.

Recommendation source: general guidelines for product selection.

User view

This cutting disc is a popular choice among DIY enthusiasts who are renovating, renovating or cutting various materials in their home or garden. It is also used by those who need a flexible tool for smaller occasional projects - for example, when cutting stone tiles in the bathroom or preparing ceramics for the kitchen. The 200 mm diameter makes it suitable for slightly deeper cuts, while still maintaining enough control when working with a hand tool.

Many users make their choice precisely because of the reliability and appropriate offering of the Silver Tools brand, which is known among home craftsmen for its good affordability and the ratio between quality and ease of use.

Why buy at Enaa

At Enaa you will find a wide selection of cutting boards, allowing you to compare them according to the purpose or material of your project. Each product clearly highlights its usability and compatibility, making the choice easier even for less experienced users. Buying through our platform is easy, as you have all the information you need to make an informed decision.

Answers to frequently asked questions

For which materials is the 200 mm diamond cutting disc suitable?

The blade is typically intended for cutting stone, ceramics, concrete or similar materials, but is not recommended for cutting metal or wood unless specifically marked as multi-purpose.

Is this disc diameter suitable for every hand tool?

Before use, always check that your machine supports a diameter of 200 mm and has the appropriate protections for safe operation. Incorrect compatibility may cause a risk of injury.

What to do if the disc wears out too quickly during cutting?

Wear is often associated with unsuitable material or cutting speed being too high. Check that the disc is correctly selected for the material and follow the instructions for your tool.

Can the board also be used for wet cutting?

Depending on the manufacturer's marking, some diamond blades allow wet cutting, which contributes to a longer service life and less dust, while others are intended for dry use only.

How do I store a diamond cutting disc to maintain its quality?

Store the disc in a dry place, protected from moisture and impacts. Prolonged exposure to moisture can affect the diamond bond and thus reduce its effectiveness.

Description updated: April 2026